2. How to restore factory settings from the master USB or CD keeping the marking parameter library

How to restore factory settings from the master USB or CD keeping the marking parameter library

1. Insert USB or CD
2. Access the Drive and open the Laser Backup Parameters folder.
3. Right click and copy the Laser Mark 2 folder that is located in the back up parameters
4. Access the computers C: drive and locate the Laser Mark 2 folder (*Note* the folder will be located right in the C: drive or within the program files (x86) folder).
5. Rename the Original Laser Mark 2 folder by putting (-old) at the end of the name
6. Paste the New Laser Mark 2 folder into the C: drive
7. Access the old Laser Mark 2 folder and go into the Param folder
8. Copy the ‘markparam.lib’ file
9. Access the new Laser Mark 2 folder, go into the Param folder and paste the file. *Note* choose Copy and Replace.
10. Delete the old Laser Mark 2 folder
11. Access the Laser Mark 2 folder and right click on the Laser Mark 2 application and select ‘Send to>Desktop (create shortcut)’
12. Remove the old shortcut off of the desktop