Automatic Z Axis

Docking Plates

Single place docking plate, available in:
5″x 5″
5″x 10″
10″x 5″
10″x 10″

Fixture Kit

This fixture kit includes:

• LMT-VPLT-225: a white Delrin pallet for parts .25 “ to .5” in diameter
• LMT-VPLT-50875: a white Delrin pallet for parts .5 “ to .875” in diameter
• LMT-VPLT-875125: a white Delrin pallet for parts .875 “ to 1.25” in diameter
• LMT-FPLT: a white Delrin pallet recessed 4”
• LMT-EZ-I: Steel Long Stop
• LMT-EZ-II: Steel L Stop
• LMT-EZ-III: Steel Small Tee
• LMT-EZ-IV: Steel Big Cross
• LMT-EZ-V: Aluminum V Blocks, magnetic (set of 2)
• LMT-DPI: 5” x 5” Single Docking Plate
• LMT-DPII-H: 10” x 5” Two Place Horizontal Docking Plate
• LMT-EZS-HGP: Guide Pins, Qty 10
• LMT-OLP: Offline Programming Dongle
• LMT-EZS-M4AW: M4 Allen Wrench
• LMT-EZS-M6B: M6 Bolts for Fixtures, Qty 8
• LMT-EZS-CC: Carrying Case

Fume Extraction Systems

LMT-ES1 – Air Dock
LMT – ES2 – Compact
LMT-ES3-Basys

 

Laser Safety Glasses

LMT-1064 SG 1064 Wave Length Safety Glasses. Necessary when using Class 4 Lasers

Lens Options

LMT-254FL 254mm Focal length lens with a marking area of 6.89in. x 6.89in.
LMT-100FL focal length lens with a marking area of 2.15in. x 2.15in.

Rotary Axis Options

LMT-R3J – Rotary axis. This larger chuck takes up no more center-to-center space than the 2.5 inch chuck, but it will hold larger work. It has a clamping range from 3/32 inch(2 mm) up to 1-1/2 inch (38 mm) diameter with the jaws in the normal position. With the jaws in the reversed position, work up to 2-3/4 inch (70 mm) can be gripped. This self-centering chuck has jaws that are individually ground to fit each slot for maximum accuracy. Rotating the knurled outer ring closes all three jaws simultaneously to quickly grip round or hexagonal stock. Tommy bars (provided) are used in the holes in the side to tighten and loosen the chuck for more leverage. The chuck is connected to the LMT 4 inch rotary table which provides smooth, controlled motion with dampened dynamic coupling via direct control from the LMT software interface.
LMT-R3J-6 – LMT-Rotary axis with a 6in Diameter with a 3 Jaw chuck.
LMT-R5C – Rotary axis with 5C collet system for continuous marking around the diameter.
LMT-R3J-T – Tilting rotary axis, primarily used in the Jewelry industry, is able to mark the OD and ID of cylindrical items.

Software Dongle

LMT-OLP – Software key to allow for offline programming of LMT Laser Marking System.

XL Auto Door

LMT-XL-AD, Cobalt-XL Auto Door Option: Opti-Touch Sensor. The Wide motorized door provides easy access to a large working area and offers enough room even for the marking of the bulkiest of work pieces

XL Turntable

LMT-XL-R-2PL Optional 360-degree 35″aluminium turntable with 2 positions for quick loading while marking (with Mobile Leveling Casters).

XL with Conveyor System

LMT-C6-XL Optional low cost conveyor system with automatic and manual load (with Mobile Leveling Casters)